[TASK] Triop tank sensors

.gitignore

@@ -0,0 +1,5 @@
+# Gitignore settings for ESPHome
+# This is an example and may include too much for your use-case.
+# You can modify this file to suit your needs.
+/.esphome/
+/secrets.yaml

README.md

@@ -0,0 +1,4 @@
+Run a specific configuration with privileged to access to USB device:
+```sh
+docker run --rm --net host --privileged -v ./:/config -it ghcr.io/esphome/esphome run triop-tank.yaml
+```

triop-tank.yaml

@@ -0,0 +1,51 @@
+esphome:
+  name: triops
+
+esp8266:
+  board: nodemcuv2
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  password: "8zXQf2Bkam2oVt"
+
+ota:
+  password: "8zXQf2Bkam2oVt"
+
+wifi:
+  ssid: "Aperture"
+  password: "cavie007"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Triops Fallback Hotspot"
+    password: "exjogUIFHifR"
+
+captive_portal:
+    
+dallas:
+  - pin: GPIO12
+
+
+i2c:
+  # SDA is connected to pin D1
+  sda: GPIO5
+  # SCL is connected to pin D2
+  scl: GPIO4
+  scan: true
+
+sensor:
+  - platform: dallas
+    address: 0x62012112cc9b8f28
+    name: "Triop water temperature"
+    id: triop_water_temp
+  - platform: bmp280
+    temperature:
+      name: "Triop ambient temperature"
+      oversampling: 4x
+    pressure:
+      name: "Triop ambient pressure"
+    address: 0x76
+    update_interval: 60s